Depstech T01

Depstech USB-C & Micro USB Endoscope, Semi-rigid USB Type-C Borescope Inspection Camera 2.0MP CMOS HD Waterproof Snake Camera with 8 Adjustable Leds for Android, Windows & Macbook Device - 16.4ft(5M)

$21.89


Buy at Amazon

This new designed USB-C endoscope can work with any Type-C port Android 4.4+ smartphone with OTG & UVC function, but also work with micro usb port Android smartphone/tablet and USB port Macbook OS & Windows 7/8/10 computer by using extra adapter.
Super Hi-Vision 2MP CMOS sensor camera, capture clear snapshot images and quality videos at a close range with resolution up to 1280 x 960.
IP67 Waterproof camera probe with 0.33inch/8.5mm diameter, easy to explore hard-to-reach or hard-to-see areas such as underwater pipe, car engine, vent pipe etc.
Equipped with 8 adjustable leds on the camera tip, it greatly helps to improve image brightness and clarity even in dark or low-light condition,and allows work much better than other version with 6 leds.
Armed with a bendable semi-rigid cable that can bend and hold it’s shape to access a wide variety of confined place, such as curved holes or pipes. This is of vital importance to pointing and positioning camera for different using angle.

Comments(18)

  • steve 03/16/2018 Reply

    how do i get to Manual/driver on my pc

  • Mike 03/29/2018 Reply

    How do i get it on my android

    • admin 04/02/2018 Reply

      Dear Mike,
      For using on your android smartphone, pls follow below steps:
      1. Install app named “Depstechcamera” or “CameraFi” from Google Play Store;
      2. Connect the camera with your android smartphone;
      3. Open the app to use the camera.
      Pls note, this endoscope can only work with android 4.4+ smartphone, supporting OTG & UVC Function, pls kindly check the these.

  • Frank 03/29/2018 Reply

    How do I get the software for my iPhone?

    • admin 04/02/2018 Reply

      Dear Frank,
      Thank you for your contact. We’re sorry to tell you the T01 endoscope isn’t compatible with iPhone IOS system, it can only work with android 4.4+ smartphone, supporting OTG & function.
      Sorry about this.

  • eric 05/19/2018 Reply

    downloaded software on my S6 just fine,camera lights. OTG checker says its fine. no image at all, and software loads, give me choice of USB endoscope (or depstech camera)

    then it says “Allow the app Deptstech Camera to access the usb device? (ok or cancel) and an option to use USB …display shows spinning circle like it is trying to do something, but nothing happens.

    • admin 05/22/2018 Reply

      Hello,you need to turn off your phone’s data and router’s signal,then try it again. If your problem still can’t be solved,please contact us via email,our email address is:support@idepstech.com. Thanks.

  • John 05/25/2018 Reply

    Received the T01-5M, downloaded the software. The LEDs light up. No camera image appears The software tries to connect to the camera but nothing happens. Sometimes upon startup an image from the camera will flash on the screen. Using Smart-Camera2.2.1. When I try using the Windows camera app I get a message that says it can’t find the camera, to check the drivers, and that antivirus software might be blocking access.

    • admin 05/31/2018 Reply

      Hello,could you turn off the phone’s data and try it again? You can also download the app”Depstech wifi”and then check whether it can work? If all those have done but your problem still can’t be solved,please contact us freely. Our email address is support@idepstech.com.Thanks.

  • kmv 06/25/2018 Reply

    Does not work on my BLU Advance 5 phone with Android os 5.1. No light. I do not know how to check for OTG & UVC functions as suggested. There is nothing in the Android Settings for OTG or UVC that I can see. How can I check this? The endoscope works on my MacBook, but is not useful to me on a laptop.

    • admin 06/25/2018 Reply

      Hello,
      We are sorry for all inconvenience to you. As i didn’t use the Blu advance 5 phone before, i also don’t know how to check OTG. But you can download free app ‘ USB OTG Checker”,this can help you to check your phone. Could you tell me your laptop’s system? You can contact us directly with our email:support@idepstech.com.

  • Marc 07/22/2018 Reply

    I’ve downloaded and extracted the .exe SmartCamera software several times, but my Windows 10 system refuses to recognize my device. It connects only with my computer’s onboard camera. How do I fix?

    • admin 07/23/2018 Reply

      Hello,
      Sorry for all inconvenience to you,could you please download our app”Depstech-wifi”from google play and try it again?
      If your problem still can’t be solved,please contact us with our email. Our email is:support@idepstech.com. Thanks.

  • Jrgass 08/09/2018 Reply

    Depstech T01

    I have downloaded Depstechcamera for my moto play as suggested below
    or using on your android smartphone, pls follow below steps:
    or using on your android smartphone, pls follow below steps:
    1. Install app named “Depstechcamera” or “CameraFi” from Google Play Store;
    2. Connect the camera with your android smartphone;
    3. Open the app to use the camera.
    Pls note, this endoscope can only work with android 4.4+ smartphone, supporting OTG & UVC Function, pls kindly check the these.
    Every time I open Depstechcamera the app crashes! I do have gotten it to work with win 10.

    Any suggestions

    • admin 08/14/2018 Reply

      Hello, could you contact our email directly? Our email is:support@idepstech.com. And please take a video or some pictures about your problem if possible.Thanks.

  • Zap 11/27/2018 Reply

    Hi my endocam is connected to my android which supports OTG but its not saying its connected and there’s no light. Any advice on how to fix this?

    • admin 11/28/2018 Reply

      Hello, could you contact our email directly? Our email is:support@idepstech.com. And please take a video or some pictures about your problem if possible.Thanks.

Leave a Reply