WiFi connection & 8.5 mm 2.0MP Camera
Compatible with Android 2.3+ & iOS devices
Exclusive tech: CAMTELE & BLUART
IP67 Waterproof & Semi-rigid cable
450 mAh Battery Capacity
Choose One
Choose One
Choose your country to Amazon:
BUY ON AMAZON
Introduction
This newest type Depstech wifi endoscope has surpassed the traditional endoscope's using limitation for iPhone user. It can work perfectly with Android 2.3+ and iOS 6.0+ smartphone. Will be a best inspection tool for iPhone user. Besides, our endoscope can support 3-4 devices simultaneous connection to view the live inspection photos or videos.
Important Notes:
· For this endoscope, do not support video recording for iOS 8.0 lower system;
· Needs to be connected with your phone via wifi in your phone network settings, instead of the app.
· When modifying the Wi-Fi password on DEPSTECH app, pls note, it can only accept either numbers or letters, any special characters are unacceptable, like @ or punctuation marks. Please be aware of this.
Yes, 1 x Mirror, 1 x Hook and 1 x Magnet are included in the package. The accessories are ideal for corner use or picking up rings and keys.
1) Please make sure you have input the correct Wi-Fi Password.
2) Please make sure the Wi-Fi box is full of power. Lower power may cause failed connection, and please recharge it timely.
3) Try to restart the Wi-Fi box and reconnect it with your phone.
4) Exit the APP interface, and re-enter.
5) Try to uninstall the Wi-Fi View APP, then re-install and update it.
6) Please keep the distance between Wi-Fi box and mobile phone within 10 meters without any obstacles.
7) Keep away from other strong Wi-Fi signal around or turn off it when using the Wi-Fi endoscope.
1) Via Android smart phone, using micro USB to micro USB charging cable (not included).
2) Via PC computer or Power Bank (DC 5V, 1A), using the extra Micro USB to USB charging cable.
Step 1: Turn on the Wi-Fi Endoscope, then it will generate a Wi-Fi signal named "Jetion_fb******".
Step 2: Open the network settings in WLAN of your phone, find the Wi-Fi "Jetion_fb******", click and enter the password "12345678" to connect it with your phone. Once connected correctly, the Wi-Fi signal will flash in blue LED. If not, please try to disconnect and reconnect with it or check the power of the Wi-Fi box.
Step 3: Open the pre-installed app "DEPSTECH" or 'Wi-Fi VIEW' which can be downloaded from APP Store and you can use the camera. Or open the pre-installed app "DEPSTECH-Wi-Fi" or 'Wi-Fi VIEW' for Android which can be downloaded from Google Play Store. Then you can use the camera.
You should connect the Wi-Fi on WLAN of your smartphone, not on the APP. If you want to change Wi-Fi name or password, you cannot enter special character.
1) Keep the Wi-Fi box and smartphone within 10m / 33ft distance (under obstacle-free environment)
2) Reset the endoscope: there is a small hole near the charging port of the Wi-Fi box. Use the provided tool or a small needle, push and hold for up to 10 seconds, and then turn on the Wi-Fi box.
1) The smartphone might have automatically connected your home Wi-Fi. Please turn off the Wi-Fi of your smartphone or set to ignore the home Wi-Fi (The home Wi-Fi might cover the signal of endoscope).
2) Try to turn on the Flight Mode or turn off the mobile data.
3) Reset the Wi-Fi: there is a small hole near the charging port of the Wi-Fi box. Use the provided tool or a small needle to long press for 10 seconds and then restart the Wi-Fi box.
1) Unload APP DEPSTECH and download it again or try another device.
2) Try the APP "Wi-Fi-VIEW".
1) Adjust the focus within the range of 7-40cm / 2.7-15.7in.
2) Adjust the pixel.
3) Move the camera slowly.
Please fully charge the endoscope.
The Wi-Fi endoscope does not support laptop use. You can try the USB endoscope.
The Wi-Fi endoscope supports iOS and Android operating system. Windows is not supported.
Be the first to know about our latest products
Comment